Headux TitanMig 368 iXP |8-in-1 Double Pulse MIG welding machine| 350A Gas-Cooled | 3-Phase 400V | CE
incl. 19% VAT
-
Estimated Delivery:Jun 26 - Jun 30
-
3-Year Warranty, plus shipping costs
Headux TitanMig 368 iXP |8-in-1 Double Pulse MIG welding machine| 350A Gas-Cooled | 3-Phase 400V | CE
Headux TitanMig 368 iXP — Industrial 8-in-1 MIG Welder, 350A Gas-Cooled, 3-Phase 400V
Heavy-duty industrial performance with gas-cooled torch: 9 welding processes, 350A output, 60% duty cycle at 350A, 15 kg spool, Dual-Drive 4-Roll wire feed. Double Pulse • Single Pulse • Fast MIG • Cold MIG • MIG Synergic • MIG Manual • MIG Gasless • Spot MIG • Lift-TIG. The gas-cooled version — lower entry cost, standard torch setup, ideal for workshops with moderate duty cycles.
Gas-Cooled Torch — Lower Cost, Standard Setup
No water cooling circuit required, no coolant to maintain, no pump to service. Lower total cost of ownership for workshops that don't run continuous 100% duty cycles. If your application demands continuous heavy-duty operation at maximum amperage, consider the water-cooled 368 iXP.
Double Pulse MIG — TIG-Quality Aluminium Welds at 350A
At 350A with Double Pulse, the alternating pulse pattern creates stacked-dime TIG aesthetics at MIG speed — aluminium trailer frames, structural components, and heavy automotive parts come out cleaner with less post-weld grinding, even on sections up to 10mm.
Dual-Drive 4-Roll Wire Feed — 15 kg Spool, Uninterrupted Production
Grips wire from both sides for consistent, slip-free delivery at 350A — critical when feeding soft aluminium wire or running long torch cables. Native 15 kg spool support means fewer spool changes and uninterrupted production runs.
Spool Gun (4m / 8m) sold separately — see Optional Accessories below.
Cold MIG — Thin Metal Precision at Industrial Scale
Cold MIG precisely controls arc energy to melt the wire without overheating the base metal — preventing burn-through on thin aluminium (0.8–1.5mm) and auto body panels. At 350A capacity, handles both thin sheet and heavy sections in the same shift, without changing machines.
3-Phase 400V — Full Industrial Power, 350A Stable Arc
3-phase 400V input delivers stable, consistent power at full 350A output — no voltage drop, no arc instability under load. 40A main fuse, compatible with standard industrial supply. Power factor 0.93 — efficient and grid-friendly.
Spot MIG — Precise Tack Welds for Production Lines
Spot MIG delivers a precisely timed arc burst — set the duration, position the torch, pull the trigger. Consistent, repeatable tack welds without burn-through or oversized spots. Ideal for fitting panels before full welding on production lines.
60% Duty Cycle @ 350A — Sustained Heavy Fabrication
60% duty cycle at full 350A (measured at 40°C) — 6 minutes of welding per 10-minute window at maximum output. 100% continuous operation at 271A. Thermal overload protection prevents machine damage if limits are exceeded.
Synergic LCD — Consistent Quality Across Every Operator
Synergic mode auto-calculates voltage and wire speed from material type and wire diameter. Job Memory stores proven parameters so any operator recalls exact settings in seconds — eliminating setup variation between shifts.
Carbon Steel
Process: DC MIG, MMA • Max: ≤14mm (400V) • Wire: ER70S-6 (0.6–1.2mm) • Gas: C18 or CO&sub2;
Stainless Steel
Process: DC MIG, TIG • Max: ≤10mm (400V) • Wire: ER308L / ER316L • Gas: 98% Ar / 2% CO&sub2;
Aluminium
Process: Double Pulse / Single Pulse MIG • Max: ≤10mm (400V) • Wire: ER4043 / ER5356 (0.8–1.2mm) • Gas: 100% Argon
Tip: Use optional Spool Gun for best wire feed over longer distances.
Flux-Core (Gasless)
Process: MIG Gasless • Max: ≤10mm (400V) • Wire: E71T-GS / E71T-11 • Gas: None required
| Model | TitanMig 368 iXP (Gas-Cooled) |
| Input Voltage | 3-Phase AC 400V (±15%) 50–60Hz |
| Main Fuse | 40A |
| MIG Current Range | 50–350A |
| MMA Current Range | 10–350A |
| No-Load Voltage | 70V |
| Wire Feed Speed | 1.5–16 m/min |
| Duty Cycle @ Imax (40°C) | 60% @ 350A |
| Duty Cycle 100% (40°C) | 271A continuous |
| Wire Diameter | 0.6 / 0.8 / 0.9 / 1.0 / 1.2mm |
| Wire Spool Capacity | 15 kg • Spool Gun compatible (optional) |
| Wire Feed System | Dual-Drive 4-Roll |
| Torch Cooling | Gas-Cooled |
| Compatible Materials | Carbon Steel • Stainless Steel • Aluminium • Copper • Flux-Core |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Protection Class | IP21S |
| Insulation Class | F |
Standard Equipment
Gas-Cooled MIG Torch MX36
Earth Lead 3m 50mm² 500A (Pure Copper)
Gas Hose 3m
Contact Tip 1.2mm
Graphite Wire Inlet Guide
Aluminium Wire Liner 3.9m
Feed Roller Aluminium (2 pcs)
Optional Accessories
TIG Torch 4m
TIG Torch 8m
Spool Gun 4m (recommended for aluminium)
Spool Gun 8m (recommended for aluminium)
Welding Lead 3m 500A
For continuous heavy-duty production: consider the Water-Cooled 368 iXP
Gas-Cooled vs Water-Cooled — Which Should You Choose?
Gas-Cooled (this model): Lower purchase price • No coolant circuit to maintain • Standard torch setup • Ideal for workshops with moderate duty cycles and varied job sizes.
Water-Cooled 368 iXP: Torch stays cool during continuous heavy-duty runs • No forced cooling breaks • Recommended for production lines running sustained high-amperage welding • Higher initial investment.
Quality, Safety & Certifications
CE Marking — EU Low Voltage Directive (LVD) & EMC Directive • IP21S • Insulation class F • Power factor 0.93 • Thermal overload protection • Legal for professional use across all EU member states.
PPE: Auto-darkening helmet • Leather gloves • Flame-resistant jacket • Welding boots • Adequate ventilation when welding indoors.
Why choose the Gas-Cooled over the Water-Cooled 368 iXP?
Does it support a Spool Gun for aluminium welding?
What is the duty cycle at 350A?
Can this machine weld carbon steel, stainless steel, and aluminium?
Is the machine CE certified for use in the EU?
🚚 Shipping Information
Shipping costs are calculated based on the total weight of your order and your delivery address within the EU. You can use the Shipping Calculator at checkout to see the exact shipping cost before completing your purchase.
- 📦 Ships from: Germany (DE)
- ⏱ Dispatch time: 1–3 business days after order confirmation
- 🌍 Delivery zone: European Union
- 💶 All prices shown exclude VAT. Applicable VAT will be calculated and added at checkout.
↩️ Returns & Refunds
In accordance with EU Consumer Rights Directive, you have the right to return your order within 14 days of receiving your goods, without giving any reason.
- Return window: 14 days from date of delivery
- To initiate a return, please contact us at [your email] with your order number
- Items must be returned in their original condition and packaging
- Return shipping costs are the responsibility of the customer, unless the item is defective or incorrect
- Refunds will be processed within 14 days of receiving the returned goods, using the same payment method as the original purchase
Frequently Asked Questions
How long does delivery take?
Thanks to our German warehouse, delivery within Germany takes 1–3 business days. As a global supplier, we can also handle international shipments quickly. Contact us for express delivery options.
Does Headux have international distribution partners?
Yes. Headux works with a growing network of distributors and service partners across Europe. Contact us to find your nearest partner or to enquire about becoming a distributor.
What quality standards do Headux products meet?
All Headux products are CE certified and comply with EU Low Voltage and EMC Directives. Our machines meet TÜV-recognised quality standards and come with a manufacturer warranty.
Does Headux offer solutions for large customers and industrial operations?
Yes. We offer tailored B2B solutions including volume pricing, flexible payment terms, dedicated account management, and technical support. Contact us at info@headux.de for a customised quote.
